Coats Kit 85608163 Inflation Cage Bracket Manuel d'utilisateur télécharger pdf

ProGuard Tire Changer

Bracket Kit 85608163

For use with COATS EL-X™ Express Lane

Inflation System

Hennessy Industries • 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Instructions

Before beginning this modification or attempting

any maintenance, remove the electrical power and air

source from the machine; also, bleed off any stored

compressed air by exhausting through the air blast foot

valve.

1. At tower remove two screws and reserve the

hardware.

2. Position cage bracket at tower and use reserved

screws to fasten cage bracket to machine tower, then

secure.

3. Use two 3/8-16 x 7/8 inch HSWF screws and two

3/8-16 UNC nuts to fasten cage bracket to inflation

cage, then secure.

4. Refer to the Tire Inflation Cage Kit 85607770

instructions for its attachment and setup procedure.

5. Reconnect the air and electric supply to the

machine. Test the machine for full function before

returning the machine to operation.

Location of Tire Inflation Cage

Provide at least three feet of clear space between

the Tire Inflation Cage and building walls. When a tire

fails, the explosive release of air will throw all movable

objects in the path of the expanding compressed air.

Wall

Trajectory

Zone

Trajectory

Zone

3-feet

Cage Attached Three Feet From Wall

Position Bracket

ProGuard

Tire Changer

Attach Bracket

To Cage

Use Existing

Hardware

Résumé du contenu

Page 1 - Bracket Kit 85608163

Commentaires sur ces manuels

Pas de commentaire

Coats Kit 85608163 Inflation Cage Bracket Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Coats Kit 85608163 Inflation Cage Bracket. COATS Kit 85608163 Inflation Cage Bracket User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Coats Kit 85608163 Inflation Cage Bracket