Coats Kit 85608159 Inflation Cage Bracket Manuel d'utilisateur télécharger pdf

Instructions

Before beginning this modification or attempting

any maintenance, remove the electrical power and air

source from the machine; also, bleed off any stored

compressed air by exhausting through the air blast foot

valve.

1. At chassis end, remove two screws and reserve

the hardware.

Important: Do not remove screw at the far left side

of the chassis.

2. Position cage bracket at chassis end and use

reserved screws to fasten cage bracket to machine

chassis, then secure.

3. Use two 3/8 x 2.5 inch U-bolts and four 3/8-16 nuts

to fasten cage bracket to inflation cage, then secure.

4. Refer to the Tire Inflation Cage Kit 85607770

instructions for its attachment and setup procedure.

5. Reconnect the air and electric supply to the

machine. Test the machine for full function before

returning the machine to operation.

Center Post Tire Changer

Bracket Kit 85608159

For use with COATS EL-X™ Express Lane

Inflation System

Hennessy Industries • 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Position Bracket And

Fasten To Machine

Center Post

Tire Changer

Attach Bracket To

Tire Inflation Cage

Kit 85607770

DO NOT remove the

far left screw.

Remove the middle

and far right screws.

1 2

Page 2

Pas de commentaire

Coats Kit 85608159 Inflation Cage Bracket Manuel d'utilisateur