Coats Kit 8114025 PCB Assembly Manuel d'utilisateur télécharger pdf

PCB Assembly Kit #8114025

Installation Instructions for Ground Strap and PCB

(950/1050 Series)

COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565

(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Description

Recent findings have shown that Electro-Static

Discharge (ESD) can cause signiﬁcant damage to a bal-

ancer. The addition of a ground strap will help to

increase the ESD immunity of the balancer. If your bal-

ancer already has the ground strap, verify that it is

making good contact and is installed correctly.

Parts List

#8114026 - PCB Assembly

#8113073 - Ground Strap

Installation

1. Remove the Touch Panel and Printed Circuit Board

(PCB) assembly from the balancer.

2. Disconnect the wires from the PCB.

3. Connect one end of the Ground Strap to the

Balancer Pod Tube, see ﬁgure 1. Wiggle the ground

strap to ensure that a good ground connection is made

with the Balancer Pod Tube.

Note: If PCB is already equipped with a ground strap,

simply reconnect to standoff and ensure other end has

a proper connection.

4. Now connect the other end of the ground strap to

the bottom right standoff that is on the backside of the

Touch Panel underneath the PCB, see ﬁgure 2.

5. After installation of the ground strap (see ﬁgure 3)

is complete, reconnect the wire harness to the PCB,

and reinstall the Touch Panel/PCB assembly on the bal-

ancer.

6. Run the balancer through a complete calibration

to ensure proper operation.

Fig. 1 - Ground Strap connected to Balancer Pod Tube.

Balancer

Pod Tube

Ground Strap

Fig. 2 - Ground Strap connected to bottom right standoff.

Fig. 3 - Ground Strap installation complete.

Bottom Right

Standoff

PCB Assembly Kit #8114025 1

Résumé du contenu

Page 1 - PCB Assembly Kit #8114025

Commentaires sur ces manuels

Pas de commentaire

Coats Kit 8114025 PCB Assembly Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Coats Kit 8114025 PCB Assembly. COATS Kit 8114025 PCB Assembly User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Coats Kit 8114025 PCB Assembly