Coats Kit 8114160 Warning Decal for XR Series Balancers Manuel d'utilisateur télécharger pdf

For XR Series Balancers Only

Kit 8114160

COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565

(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Instructions

Important: If the decal being replaced is an older/dif-

ferent decal than the new decal shown above, then the

ON/OFF switch must be rotated 180-degrees to match

the new decal ON/OFF graphic.

1. Turn power OFF at machine.

2. Unplug power cord at receptacle.

3. Remove weight tray.

4. Press retaining tabs at top and bottom of switch

and push switch outward through panel hole.

5. Rotate switch 180-degrees and press back into

the same hole.

6. Assemble parts back in reverse order, add the

new decal and power up machine.

New ON/OFF Graphic

Pas de commentaire

Coats Kit 8114160 Warning Decal for XR Series Balancers Manuel d'utilisateur