Coats Kit 8184045, Robo Arm Manuel d'utilisateur télécharger pdf

1. Before beginning any work, clear the area and

position the machine for easy access. Disconnect all

power sources, both air and electricity inputs. Allow

any stored air in the reservoir to escape by depress-

ing the inflate valve.

2. Verify the stored air pressure is zero by observ-

ing the air pressure gauge on top of the tower. (see

photo). Next with a 1

/16-inch socket wrench remove

the manifold with the gauge and safety valve.

3. Next install the included manifold with the

gauge and safety valve plus a barbed hose fitting.

Tighten until the barbed fitting is located as shown in

photo.

4. Next, remove the nut on the bolt supporting the

swing arm pivot system. With the new long bolt

(10

/4-inches) push the old bolt out with the new bolt.

Make sure the small washer is on the head of the

new bolt.

Robo-Arm™ Kit 8184045

Installation Instructions

with Parts Identification

For use with COATS Model Series Tire Changers

COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565

(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX

Figure 2

Figure 3

Figure 1

Figure 4

Old Bolt

New Bolt

8184060 04 04/01

Kit 8184045

1 2 3 4

Résumé du contenu

Page 1 - Installation Instructions

1. Before beginning any work, clear the area andposition the machine for easy access. Disconnect allpower sources, both air and electricity inputs. Al

Page 2 - Robo-Arm™

5. Next, install the large plated spacer, the swingarm (note position of the decal) with pivot pin spacer,and the lock nut. Next, using large wrenches

Page 3

9. Next, unwrap the red hose from valve, guidethrough hose clamps; and, with the hose pushedover the barbed fitting, tighten the screw type hoseclamp.

Page 4

Commentaires sur ces manuels

Pas de commentaire

Coats Kit 8184045, Robo Arm Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Coats Kit 8184045, Robo Arm. COATS Kit 8184045, Robo Arm User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Coats Kit 8184045, Robo Arm